Product Introduction:
Railway tractor is a special vehicle that can run not only on railway tracks, but also on general roads and even in the field. Early use was mainly military. Hyundai mainly undertakes maintenance, rescue and other emergency tasks along railway lines. It is required that the road and railway can be converted quickly and conveniently. It is usually achieved through the hydraulic lane changing rotary device on the chassis and the railway driving guide wheel device that can take off and land at any time. With the guide wheel device, the general rubber tire wheel can run straight along the rail. Because the vehicle requires a certain amount of traction and carrying capacity, it can play a unique role in the case of disruption or blockage of railway lines due to disasters. Special road and rail vehicles are: electrification traction section contact line repair vehicle, excavator for mountain railway emergency repair, as well as emergency tractor, power generation vehicle, fire truck, rapid bridging vehicle and so on.
Ⅰ. advantages and characteristics
1, long service life, can be used for more than 10 years;
2, do not need a garage, do not occupy the work site and railway line.
3, cost-effective, energy saving, environmental protection, noise reduction.
4, unique technology, low speed large traction;
5, easy to operate, low labor intensity, a slightly trained driver can operate independently;
6, two-way traction, steering operation can not go through the switch;
7, maintenance is simple, low failure rate;
8, mobile and flexible, convenient road and railway conversion, shunting operation time is fast, reduce the truck delay fee;
9, mainly used for railway line aerial operation maintenance, but also for operation traction;
Ⅱ. Parameters
Models/Projects | TWRR110(Integrated body, steel wheel drive) |
Rated towed tonnage | 1500 |
Vehicle length * width(mm) | 7500/2200 |
Vehicle height(mm) | 3000 |
Coupler height(mm) | 880±10(customizable) |
Traction mode | Bidirectional traction |
Radius of passing curvature(m) | 120 |
Highway turning radius(m) | 7.5 |
Applicable gauge(mm) | 1000/1435/1520(customizable) |
Traction speed(KM/H) | 0-10 |
Highway speed(KM/H) | 0-20 |
Dead weight of vehicle KG | ≥26000 |