Sleeper replacement machine

It consists of two parts: pillow changing clamp and shield plate. First of all, the large shield plate can be used to easily and quickly clear the subgrade gravel around the sleeper that needs to be replaced, and then use its hydraulic grab to clamp the sleeper that needs to be replaced and pull it out of the track bed, and put the new sleeper into the track bed under the rail. Then use the large shield plate to smooth the subgrade gravel. To clean, change, leveling is completed in one time, the average 30-60 seconds to replace a tie, convenient and fast.

Ballast plough

Ballast plow is a kind of equipment that can easily adjust the distribution of ballast in the track. The Angle and direction of opening and closing can be adjusted on both sides of the plow plate. By adjusting the opening and closing direction of the plow plate on both sides, the plow plate can be extended to expand the scope of operation, and the Angle of slope can be changed quickly. Therefore, the equipment can not only repair the roadbed slope, but also smoothly repair the horizontal shoulder pedestrian path.

Slope cleaner

It is suitable for the cleaning, shaping and shaping of the stone on both sides of the railway line. The Angle can be freely adjusted, the operation is convenient and quick, the labor intensity is reduced, and the operation quality is guaranteed.

Rotary tilting bucket

It is suitable for moving backfill of railway slag stone, bucket shoulder molding operation, 360 degree rotation, 45 degree tilt, multi-angle operation, bucket bottom can be made into plane type and grid type.

Bush cleaner

It is suitable for shrub cleaning on both sides of railway. Through high-speed rotation, it can realize the crushing operation of shrub, which is divided into dao piece type and roller type, crushing shrubs of different diameters.

Tamping machine

It is suitable for 70-150 excavator, which is used for tamping and tamping operation after renovation. The tamping clamping range is 180-700mm. There are two kinds of four claws and eight claws, suitable for various gauge.

Rail clamp

It is used for replacing the rail of the small section of the skylight point. It is suitable for the rail gauge: 1435mm, 1520mm, 1000mm, 43/50/60/75, and the fixture opening is 415mm. The bearing capacity is strong, and the rail can be replaced quickly.

Screen cleaner

For the excavation of sleeper bottom ballast, the excavation mechanism cuts into the sleeper bottom from one side of the line through the rotary mechanism in a way of side cutting, and the excavated ballast is transported to the outside of the sleeper through the row ballast mechanism.

High frequency screening hopper

Used with the cleaning machine, the foreign matter in the stone can be quickly screened through the cross rubbing teeth vibration, the screening frequency is high, and the fast backfilling operation can be realized.

Slag hopper

Divided into two types of rotary and mechanical, clean up between the sleeper and the sleeper stone, can quickly clean the bottom of the rail slab stone.